Network Control Program

  Uncategorized

Network Control Program

From Wikipedia, the free encyclopedia
This article is about the ARPANET Network Control Program. For Novell NetWare protocol, see NetWare Core Protocol. For the IBM Network Control Program software, see IBM Network Control Program.

The Network Control Program (NCP) provided the middle layers of the protocol stack running on host computers of the ARPANET, the predecessor to the modern Internet.

NCP preceded the Transmission Control Protocol (TCP) as a transport layer protocol used during the early ARPANET. NCP was a simplex protocol that utilized two port addresses, establishing two connections, for two-way communications. An odd and an even port were reserved for each application layer application or protocol. The standardization of TCP and UDP reduced the need for the use of two simplex ports for each application down to one duplex port.[1]:15

History[edit]

NCP provided connections and flow control between processes running on different ARPANET host computers. Application services, such as email and file transfer, were built on top of NCP, using it to handle connections to other host computers.

On the ARPANET, the protocols in the Physical Layer, the Data Link Layer, and the Network Layer used within the network were implemented on separate Interface Message Processors (IMPs). The host usually connected to an IMP using another kind of interface, with different physical, data link and network layer specifications. The IMP’s capabilities were specified by the Host/IMP Protocol in BBN Report 1822.

Since lower protocol layers were provided by the IMP-host interface, NCP essentially provided a Transport Layer consisting of the ARPANET Host-to-Host Protocol (AHHP) and the Initial Connection Protocol (ICP). AHHP defined procedures to transmit a unidirectional, flow-controlled data stream between two hosts. The ICP defined the procedure for establishing a bidirectional pair of such streams between a pair of host processes. Application protocols (e.g., FTP) accessed network services through an interface to the top layer of the NCP, a forerunner to the Berkeley sockets interface.

Stephen D. Crocker, then a graduate student at UCLA, formed and led the Network Working Group (NWG) and specifically led the development of NCP. Other participants in the NWG developed application level protocols such as TELNET, FTP, SMTP, among others.

Transition to TCP/IP[edit]

On January 1, 1983, in what is known as a “flag day“, NCP was officially rendered obsolete when the ARPANET changed its core networking protocols from NCP to the more flexible and powerful TCP/IP protocol suite, marking the start of the modern Internet.[2][3][4][5
]

LEAVE A COMMENT